Engineered from high-performance polycarbonate, this 3-inch U-bolt offers superior corrosion resistance and electrical insulation. Ideal for demanding environments where metal fasteners fail.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 3.98" |
| Inside Length ( B) | 5.92" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this 3-inch polycarbonate U-bolt is designed for reliable pipe support in corrosive or electrically sensitive applications. With an inside width (A) of 3.98 inches and an inside length (B) of 5.92 inches, it accommodates standard 3-inch nominal pipes. The 1/2"-13 thread size ensures secure fastening with compatible hardware. Polycarbonate's inherent properties provide excellent chemical resistance, UV stability, and a high dielectric strength, making it an excellent alternative to traditional metal U-bolts in marine, chemical processing, and wastewater treatment industries. Its non-conductive nature further enhances safety in specific installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it straddles the pipe and rests on a suitable support structure or mounting surface. 2. Thread the nuts onto the U-bolt legs until snug, but do not fully tighten. 3. Apply even pressure to both nuts, tightening them incrementally until the U-bolt firmly secures the pipe without deforming it.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the U-bolt, leading to potential cracking of the polycarbonate. | Tighten nuts incrementally and evenly. Stop when the pipe is securely held, avoiding excessive force. |
| Using metal washers directly against the polycarbonate, which can cause stress points. | Utilize plastic or rubber washers between the U-bolt nut and the mounting surface to distribute pressure evenly. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plant piping, Marine and offshore installations, Wastewater and water treatment facilities, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||