This robust 3" Nylon U-Bolt offers superior corrosion resistance and electrical insulation. Engineered for secure pipe and conduit mounting, it ensures long-lasting performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 4.89" |
| Inside Length ( B) | 2.30" |
| Thread Size | 1/2"-13 |
Trusted by engineers across multiple sectors, this Nylon U-Bolt is specifically designed for 3" nominal pipe sizes. It features an inside width (A) of 4.89 inches and an inside length (B) of 2.30 inches. The robust 1/2"-13 UNC thread size ensures a secure and reliable fastening. Manufactured from high-strength, UV-resistant nylon, it provides excellent chemical resistance and a non-conductive solution, ideal for applications where galvanic corrosion is a concern or electrical isolation is required. Operating temperature range: -40°F to 180°F.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe or conduit, ensuring it rests on a suitable mounting surface. 2. Thread the nuts onto the U-bolt legs until snug against the mounting surface. 3. Tighten nuts evenly to the recommended torque specification (refer to load rating chart for specific value), ensuring a secure but not over-compressed fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts | Tighten nuts until the U-bolt makes firm contact with the mounting surface. Over-tightening can deform the nylon and reduce its load-bearing capacity. |
| Using the wrong size U-bolt | Verify the nominal pipe size and corresponding U-bolt dimensions (Inside Width A, Inside Length B) before installation to ensure a proper fit and secure support. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Plumbing and pipe support, Electrical conduit mounting, Marine and chemical processing, Automotive and industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||