This robust carbon steel U-bolt is engineered for secure and reliable support of 3" diameter piping in rigorous industrial settings. Features precise threading for dependable fastening.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 2.33" |
| Inside Length ( B) | 4.68" |
| Thread Size | 1/2"-13 |
Designed for demanding industrial environments, this U-bolt is forged from high-strength carbon steel, offering superior load-bearing capacity and corrosion resistance for long-term performance. The internal dimensions are precisely manufactured to accommodate standard 3" nominal pipe size (NPS) with an actual outside diameter of approximately 3.5". The inside width (A) measures 2.33 inches, and the inside length (B) is 4.68 inches, ensuring a snug and secure fit. Equipped with robust 1/2"-13 UNC threading on both legs, it provides ample surface area for secure fastening with accompanying nuts and washers (sold separately) for critical structural integrity and vibration dampening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface, ensuring proper alignment. 2. Thread the nuts onto the U-bolt legs, initially by hand to check for cross-threading. 3. Tighten the nuts evenly and securely using appropriate wrenches, applying torque as specified by engineering or project requirements, ensuring the pipe is held firmly without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Selecting a U-bolt with incorrect internal dimensions for the pipe's actual outside diameter. | Always verify the actual outside diameter of the pipe to be supported and select a U-bolt with appropriate internal width and length for a secure fit. |
| Over-tightening or under-tightening the nuts, leading to pipe deformation or inadequate support. | Utilize a torque wrench to apply the manufacturer's recommended torque or project-specified torque for optimal load distribution and pipe integrity. |
A: This Carbon Steel U-Bolt, 3" Pipe is manufactured from Carbon Steel.
A: Plumbing and HVAC pipe support, Structural steel and conduit securing, Machinery and equipment mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||