This industrial-grade U-bolt is expertly crafted from high-strength carbon steel to reliably secure 3" diameter piping systems. Designed for demanding environments, it ensures a stable and long-lasting installation.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 4.29" |
| Inside Length ( B) | 2.51" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is forged from premium carbon steel, offering superior tensile strength and resistance to environmental factors. The precise dimensions, including an inside width (A) of 4.29 inches and an inside length (B) of 2.51 inches, are engineered for a snug fit around standard 3" pipes. The 1/2"-13 UNC threading on each leg ensures secure fastening with compatible nuts and washers, providing robust support for plumbing, mechanical, and structural applications where vibration and load bearing are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe is centered within the U-bolt. 2. Place the accompanying support plate or saddle (if applicable) over the U-bolt legs. 3. Thread the nuts onto the U-bolt legs evenly, tightening them sequentially to achieve uniform clamping force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, leading to pipe deformation or stress. | Tighten nuts gradually and evenly, alternating sides. Use a torque wrench to adhere to recommended torque specifications for the application. |
| Using the wrong size U-bolt for the pipe diameter. | Always verify the pipe's outer diameter and select a U-bolt with an inside width that accommodates it without excessive play or compression. |
A: This Carbon Steel U-Bolt, 3" Pipe is manufactured from Carbon Steel.
A: Piping and conduit support in industrial facilities, Securing conduit and electrical raceways, Structural support for mechanical assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||