This heavy-duty carbon steel U-bolt is engineered for secure pipe support and clamping in demanding industrial environments. Its precise dimensions ensure a snug fit for 3" nominal pipe sizes, providing reliable structural integrity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 2.01" |
| Inside Length ( B) | 6.57" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this U-bolt is fabricated from high-strength carbon steel, offering excellent load-bearing capacity and resistance to common industrial stresses. With an inside width (A) of 2.01 inches and an inside length (B) of 6.57 inches, it is specifically designed to accommodate standard 3-inch nominal pipe diameters while providing ample clearance for insulation or conduit. The 1/2"-13 UNC (Unified National Coarse) thread size on both legs ensures secure fastening with standard nuts and washers, facilitating robust pipe mounting and vibration dampening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it is centered. 2. Place the U-bolt legs through the mounting surface or clamping bracket. 3. Securely fasten the U-bolt using appropriate nuts and washers, tightening evenly on both sides until the pipe is firmly held.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size and select a U-bolt with compatible inside dimensions to ensure a secure and proper fit. |
| Over-tightening the nuts, leading to pipe deformation. | Tighten nuts incrementally and evenly, using a torque wrench if specified, to achieve a secure hold without compromising the pipe's integrity. |
A: This Carbon Steel U-Bolt, 3" Pipe is manufactured from Carbon Steel.
A: Pipe Hangers and Supports, Conduit Securing, Structural Clamping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||