This robust 3" Carbon Steel U-Bolt is engineered for secure and reliable pipe mounting. Its precise dimensions and durable carbon steel construction ensure long-lasting performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 4.04" |
| Inside Length ( B) | 4.23" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is constructed from high-grade carbon steel, offering excellent tensile strength and resistance to corrosion for reliable structural support. It features an inside width (A) of 4.04 inches and an inside length (B) of 4.23 inches, precisely sized to accommodate a 3-inch nominal pipe. The threaded ends are 1/2"-13 UNC, designed for secure fastening with standard nuts and washers, ensuring a stable and vibration-resistant pipe installation across various industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it rests flush against the mounting surface. 2. Thread the accompanying nuts onto the U-bolt legs, tightening them evenly to secure the pipe. 3. Verify the pipe is held firmly and will not shift under operational loads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts until snug, then apply an additional quarter to half turn to ensure security without excessive force. Consult torque specifications if available. |
| Using incorrect thread size nuts, leading to a loose or unsafe connection. | Always confirm the thread size (1/2"-13 UNC) matches the nuts and that they are fully engaged on the U-bolt's threaded section. |
A: This Carbon Steel U-Bolt, 3" Pipe is manufactured from Carbon Steel.
A: Plumbing and HVAC pipe support, Electrical conduit mounting, Structural support for various piping systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||