This 3-inch brass U-bolt provides robust and corrosion-resistant support for piping systems. Engineered for durability, it ensures secure mounting in environments where traditional materials may degrade.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 4.56" |
| Inside Length ( B) | 5.64" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this U-bolt is manufactured from high-grade brass, offering exceptional resistance to a wide range of corrosive media, including saltwater, chemicals, and atmospheric contaminants. The precise dimensions, with an inside width (A) of 4.56 inches and an inside length (B) of 5.64 inches, accommodate standard 3-inch nominal pipe sizes. The robust 1/2"-13 UNC thread size ensures secure fastening with compatible nuts and washers (sold separately), providing a reliable mechanical connection for critical infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface. 2. Insert the threaded legs through the designated mounting holes. 3. Securely fasten with appropriate nuts and washers (sold separately), ensuring even tension on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel hardware with brass U-bolts. | Always use brass or stainless steel nuts and washers to prevent galvanic corrosion. |
| Overtightening the U-bolt, causing pipe deformation. | Tighten fasteners to the manufacturer's recommended torque specification to avoid damaging the pipe or the support. |
A: This Brass U-Bolt, 3" Pipe is manufactured from Brass.
A: Marine and offshore piping, Chemical processing plants, Wastewater treatment facilities.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||