This heavy-duty Brass U-Bolt provides robust and corrosion-resistant pipe support for 3" nominal diameter pipes. Precisely manufactured to ensure a secure and long-lasting installation.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 2.71" |
| Inside Length ( B) | 4.80" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 1/2"-13 threaded Brass U-Bolt is designed for 3" nominal pipe. Its internal dimensions measure 2.71" (A) in width and 4.80" (B) in length, ensuring a snug fit. Crafted from high-grade brass (typically UNS C26000 or similar), it offers exceptional resistance to corrosion, particularly in marine, chemical processing, and potable water applications. The material's inherent strength and ductility allow for reliable clamping without compromising the pipe's integrity. Each U-bolt undergoes rigorous quality checks to guarantee dimensional accuracy and material composition.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it straddles the pipe evenly. 2. Place the accompanying backing plate (if applicable) and thread the nuts onto the U-bolt's threaded ends. 3. Tighten the nuts alternately and evenly to achieve the specified clamping force, avoiding over-tightening which could deform the pipe or U-bolt.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong U-bolt size for the pipe's nominal diameter. | Always verify the pipe's nominal diameter and compare it to the U-bolt's internal dimensions (A) to ensure a proper fit. |
| Uneven tightening of the nuts, leading to biased stress on the pipe and U-bolt. | Tighten nuts in an alternating pattern, gradually increasing torque until the desired tightness is achieved, ensuring even pressure distribution. |
| Using steel U-bolts in corrosive environments where brass is specified. | Select U-bolts made from materials specifically suited to the environmental conditions. Brass is chosen for its superior corrosion resistance in certain applications. |
A: This Brass U-Bolt, 3" Pipe is manufactured from Brass.
A: Marine hardware and plumbing, Chemical processing equipment support, Potable water system installations, Exhaust system clamping, General pipe anchoring and support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||