Engineered for optimal performance in power transmission systems, this deep groove ball bearing features a robust nylon construction. Its precise dimensions ensure smooth operation and extended service life in various industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 28mm |
| Outside Diameter | 174mm |
| Width | 44mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an inside diameter of 28mm, an outside diameter of 174mm, and a width of 44mm. The advanced nylon material offers superior corrosion resistance, significantly lower friction compared to steel alternatives, and a lighter weight profile. This makes it ideal for applications where reduced maintenance, chemical compatibility, and energy efficiency are paramount. Its design accommodates both radial and axial loads, ensuring reliable operation under moderate stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the shaft and the bearing housing thoroughly to remove any debris or lubrication. 2. Carefully press the bearing onto the shaft, ensuring it seats squarely and without tilting. 3. Gently press the shaft and bearing assembly into the housing, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation. | Use a proper bearing press or a well-fitted sleeve to apply even pressure, avoiding direct impact on the bearing rings. |
| Inadequate lubrication for the application. | Consult the bearing's datasheet for recommended lubrication types and reapplication intervals based on operating speed and load. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Electric motors, Automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||