This 2.8-inch Schedule 40 seamless carbon steel pipe offers exceptional strength and integrity for demanding fluid conveyance and structural applications. Manufactured to exacting standards for reliable performance.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 1.542" |
| Wall Thickness | 0.466" |
Precision-manufactured to tight tolerances, this 2.8-inch nominal pipe size (NPS) seamless carbon steel pipe boasts an actual outside diameter of 1.542 inches and a substantial wall thickness of 0.466 inches, conforming to Schedule 40 specifications. The seamless construction ensures uniform wall thickness and eliminates longitudinal weld defects, making it ideal for high-pressure, high-temperature, and corrosive environments. Its robust carbon steel composition provides excellent tensile strength and durability, suitable for a wide range of industrial processes and structural supports where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Apply appropriate threading compound or sealant to male threads. 3. Carefully thread the pipe into the fitting or mating component until hand-tight, then tighten further with a pipe wrench as required by pressure and application specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect threading compound for the application's fluid or temperature. | Consult material compatibility charts and select a threading compound rated for the specific service conditions. |
| Over-tightening pipe threads, leading to potential cracking or deformation of the fitting or pipe. | Tighten to snugness followed by the recommended turns (typically 1-1.5 turns past hand-tight) based on fitting type and pressure rating. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transport, Structural supports and frameworks, Oil and gas industry pipelines, Chemical processing, General purpose industrial piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||