This 2.8" Schedule 40 seamless nylon pipe offers exceptional durability and chemical resistance. Engineered for high-pressure fluid handling and robust protection in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 5.840" |
| Wall Thickness | 0.309" |
Manufactured under strict quality controls, this 2.8" Schedule 40 seamless nylon pipe features an outside diameter of 5.840" and a precise wall thickness of 0.309". Nylon's inherent properties provide excellent abrasion resistance, tensile strength, and resistance to a wide range of chemicals, oils, and fuels. This makes it suitable for high-pressure hydraulic lines, pneumatic systems, and protective conduit for sensitive cables in manufacturing, automotive, and agricultural sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Utilize appropriate solvent cement and primer specifically formulated for nylon. 3. Apply cement evenly to both mating surfaces and join with a twisting motion, holding firmly until set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement or primer not rated for nylon. | Always use solvent cement and primer explicitly designed for nylon to ensure a strong, leak-proof bond. |
| Insufficient cure time before pressurizing the system. | Allow the solvent-welded joint to cure for the manufacturer-recommended time (typically 24 hours) before introducing pressure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: High-pressure hydraulic lines, Pneumatic systems, Protective conduit for cables and wires.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||