This 2.8" Schedule 40 seamless nylon pipe offers exceptional durability and chemical resistance. Engineered for demanding applications, it provides a reliable conduit for fluid and gas transport.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 4.334" |
| Wall Thickness | 0.169" |
Engineered for reliability and performance, this seamless Nylon pipe conforms to Schedule 40 dimensions, featuring a nominal pipe size of 2.8 inches, an exact outside diameter of 4.334 inches, and a precise wall thickness of 0.169 inches. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and resistance to a wide range of chemicals, oils, and solvents, make it ideal for high-pressure and corrosive environments. Its seamless construction eliminates potential leak paths associated with welded seams, ensuring integrity under sustained operational stress. This material offers a robust solution for conveying various media where material degradation is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement and primer to both pipe end and fitting socket, following manufacturer's guidelines. 3. Assemble pipe and fitting with a firm, twisting motion and hold for 30 seconds to allow initial bond set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for Nylon. | Always use a solvent cement specifically formulated for Nylon tubing and fittings to ensure proper chemical bonding and joint integrity. |
| Over-tightening threaded connections. | Nylon can be susceptible to stress cracking when over-tightened. Hand-tighten and then give a quarter to half turn with a wrench, depending on the fitting type. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Chemical transfer lines, Automotive fluid lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||