This robust deep groove ball bearing, constructed from high-grade carbon steel, is engineered for superior performance in demanding power transmission applications, offering exceptional load-bearing capacity and smooth operation.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 26mm |
| Outside Diameter | 111mm |
| Width | 17mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 26mm, an outside diameter of 111mm, and a width of 17mm. Manufactured from hardened carbon steel, it provides excellent wear resistance and durability for sustained operation under radial and axial loads. Its precision raceways and cage design minimize friction, ensuring efficient power transfer and extended service life in a wide range of industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surfaces and shaft thoroughly. 2. Carefully press the bearing onto the shaft or into the housing, ensuring proper alignment. 3. Verify smooth rotation and absence of binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening mounting fasteners | Ensure fasteners are snug but not over-tightened to avoid deforming the bearing housing or races. |
| Improper lubrication during installation | Apply the recommended lubricant sparingly before initial operation to ensure adequate protection and reduce friction. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||