This Schedule 40 seamless brass pipe, featuring a 2.6" nominal size, 4.794" OD, and 0.452" wall thickness, is engineered for exceptional durability and corrosion resistance in critical industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.6" |
| Outside Diameter | 4.794" |
| Wall Thickness | 0.452" |
Specified by design engineers worldwide, this 2.6" Schedule 40 seamless brass pipe offers a robust 0.452" wall thickness on a 4.794" outside diameter, ensuring high tensile strength and exceptional resistance to corrosive media. Brass alloys provide excellent machinability and thermal conductivity, making this pipe ideal for a wide range of fluid handling systems, heat exchangers, and structural components in chemical processing, marine, and oil & gas industries where longevity and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate joint compound or tape suitable for brass fittings and the conveyed fluid. 3. Carefully align and tighten fittings to achieve a secure, leak-free connection, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joint sealants for brass alloys. | Always select thread sealants specifically rated for use with brass and the chemical nature of the transported fluid to prevent premature degradation or contamination. |
| Excessive force applied during fitting assembly. | Tighten fittings sufficiently to create a seal, but avoid excessive torque which can deform the pipe threads or fittings, leading to leaks or structural failure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Chemical Processing Fluid Transfer, Heat Exchanger Tubing, Marine Piping Systems, Oil & Gas Downhole Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||