Engineered for superior performance, this deep groove ball bearing offers exceptional load-bearing capacity and smooth operation. Its lightweight aluminum construction ensures optimal efficiency in power transmission systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 25mm |
| Outside Diameter | 97mm |
| Width | 13mm |
Specified by design engineers worldwide, this deep groove ball bearing (25mm ID, 97mm OD, 13mm Width) is precision-manufactured from Aluminum 6061. This aerospace-grade alloy provides an excellent strength-to-weight ratio, superior corrosion resistance, and good thermal conductivity, making it ideal for applications where weight reduction and environmental durability are critical. It is designed to accommodate radial and axial loads in both directions, ensuring reliable performance in various operating conditions. Its robust construction guarantees longevity and minimal maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing bore and shaft thoroughly before installation. 2. Carefully press the bearing onto the shaft or into the housing using a suitable press or vice, ensuring alignment. 3. Verify free rotation of the bearing and check for any signs of binding or abnormal noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during press-fit installation, causing brinelling of the raceways. | Apply controlled, even pressure using a bearing press or appropriate tooling, and ensure the shaft or housing is within specified tolerance for a snug fit, not a forced one. |
| Contaminating the bearing during installation, leading to premature wear. | Handle the bearing with clean hands or gloves and install it in a clean environment, protecting it from dust and debris until the final assembly. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||