This premium deep groove ball bearing, constructed from lightweight and corrosion-resistant Aluminum 6061, offers superior performance in power transmission systems. Its precise dimensions ensure optimal load distribution and reduced friction.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 25mm |
| Outside Diameter | 135mm |
| Width | 13mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 25mm, an outside diameter of 135mm, and a width of 13mm. The Aluminum 6061 alloy provides an excellent strength-to-weight ratio, making it ideal for applications where weight reduction is critical, without compromising structural integrity. This material also offers inherent corrosion resistance, extending the bearing's lifespan in potentially harsh environments. Its design is optimized for radial and axial loads, ensuring smooth, low-friction operation in demanding power transmission duties. These characteristics make it suitable for use in electric motors, gearboxes, and material handling equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing bore and shaft are clean and free from debris. 2. Gently heat the outer ring of the bearing or cool the shaft to facilitate insertion. 3. Press the bearing onto the shaft or into the housing, ensuring it is seated squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage. | Use a proper bearing installer or press, applying force only to the ring being fitted. |
| Using incorrect lubrication, leading to premature wear. | Consult the bearing manufacturer's recommendations for the appropriate lubricant type and quantity for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motor Shafts, Gearbox Assemblies, Material Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||