This 2.5" Schedule 80 Nylon seamless pipe offers exceptional strength and chemical resistance. Its robust construction makes it ideal for demanding industrial applications, ensuring reliable fluid and gas transport under pressure.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 5.684" |
| Wall Thickness | 0.321" |
Manufactured under strict quality controls, this 2.5" Schedule 80 nylon seamless pipe boasts a 5.684" outside diameter and a substantial 0.321" wall thickness, engineered for high-pressure applications. Nylon's inherent properties provide excellent abrasion resistance, low coefficient of friction, and broad chemical compatibility, making it suitable for transporting a wide range of fluids and gases, including oils, hydraulic fluids, and certain solvents. Its seamless design eliminates potential leak paths and enhances structural integrity, crucial for critical systems where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate fittings or solvent cement as per manufacturer's recommendations for nylon pipe. 3. Connect pipe sections, ensuring a secure and leak-free joint, and allow adequate curing time if solvent cement is used.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fittings not designed for nylon pipe. | Always use fittings specifically rated for nylon pipe to ensure proper sealing and prevent material damage. |
| Over-tightening connections, which can crush or deform the nylon pipe. | Tighten fittings to the manufacturer's specified torque or hand-tight plus a quarter turn, avoiding excessive force. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Hydraulic systems, Pneumatic lines, Chemical transport, Automotive fuel lines, Industrial fluid transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||