Engineered for demanding fluid transfer, this 2.5" Schedule 80 seamless nylon pipe offers exceptional pressure handling and chemical resistance. Its robust construction ensures reliability in challenging industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 1.485" |
| Wall Thickness | 0.354" |
Specified by design engineers worldwide, this 2.5" NPS (Nominal Pipe Size) Schedule 80 seamless nylon pipe features an outside diameter of 1.485 inches and a substantial wall thickness of 0.354 inches. This precise dimensional tolerance ensures compatibility with standard fittings and optimal fluid dynamics. The inherent properties of nylon, including excellent abrasion resistance, low friction, and good chemical inertness against many solvents and hydrocarbons, make it suitable for a wide range of fluid conveyance systems requiring durability and leak-proof performance under elevated pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement for nylon fittings to both the pipe end and the fitting socket. 3. Firmly insert the pipe into the fitting with a slight twisting motion, holding for 30 seconds to allow initial bonding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement not specifically formulated for nylon. | Always utilize a solvent cement explicitly designed and recommended for bonding nylon pipes and fittings to ensure a strong, reliable joint. |
| Insufficient curing time after joining, leading to premature joint failure. | Allow adequate curing time as specified by the solvent cement manufacturer before subjecting the system to pressure or operational loads. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Hydraulic systems requiring high pressure resistance, Chemical fluid transfer in processing plants, Pneumatic conveyance lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||