This 2.5" Schedule 80 seamless aluminum 6061 pipe offers superior strength and corrosion resistance. Precisely manufactured for critical fluid transfer and structural applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 6.021" |
| Wall Thickness | 0.395" |
Engineered for reliability and performance, this 2.5-inch Schedule 80 seamless pipe is constructed from Aluminum Alloy 6061-T6, renowned for its excellent strength-to-weight ratio and weldability. Featuring an outside diameter of 6.021 inches and a robust 0.395-inch wall thickness, it meets stringent industry standards for pressure containment and structural integrity. This alloy provides good corrosion resistance, making it ideal for applications involving moderate stress and exposure to various environments, including marine, aerospace, and general industrial uses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe fitting compatibility and clean all mating surfaces. 2. Apply appropriate sealant or welding material for the specific application. 3. Carefully align and secure the pipe using calibrated torque wrenches or welding procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fittings for Schedule 80 pipe. | Always match fittings to the specified Schedule 80 dimensions to ensure a secure and leak-proof connection. |
| Inadequate surface preparation before joining. | Thoroughly clean pipe ends and fittings to remove any debris, oxidation, or contaminants that could compromise the joint integrity. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: High-pressure fluid conveyance systems, Structural components in corrosive environments, Aerospace and automotive fluid lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||