This 2.5" Schedule 40 seamless polycarbonate pipe offers exceptional clarity, impact strength, and chemical resistance. Ideal for visual monitoring and harsh industrial applications where durability is paramount.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 1.768" |
| Wall Thickness | 0.465" |
Designed for demanding industrial environments, this 2.5" Schedule 40 seamless pipe is manufactured from high-performance polycarbonate, offering superior impact resistance and excellent clarity for visual flow monitoring. It features an outside diameter of 1.768" and a robust wall thickness of 0.465", ensuring structural integrity under pressure and resistance to a wide range of chemicals. Its non-brittle nature makes it suitable for applications subject to vibration or thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, dry, and free from debris. 2. Apply appropriate solvent cement specifically formulated for polycarbonate to both the pipe end and fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion and hold firmly for 30 seconds to prevent slippage. 4. Allow adequate cure time as specified by the solvent cement manufacturer before subjecting the assembly to pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using solvent cement not rated for polycarbonate. | Always use a solvent cement specifically recommended and tested for polycarbonate pipe and fittings to ensure proper fusion and seal integrity. |
| Insufficient support leading to sagging or deformation. | Install pipe hangers or supports at recommended intervals to prevent excessive stress on the pipe, especially for longer runs or in elevated temperature conditions. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Visual flow monitoring systems, Chemical transfer lines with moderate pressures, Protective conduit for sensitive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||