This 2.5" Schedule 40 seamless nylon pipe is engineered for demanding industrial environments. Its robust construction ensures reliable fluid and pneumatic transport under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 4.088" |
| Wall Thickness | 0.104" |
Purpose-built for heavy-duty applications, this 2.5" Schedule 40 seamless nylon pipe offers exceptional chemical resistance and abrasion durability. With an outside diameter of 4.088" and a wall thickness of 0.104", it meets rigorous industry standards for pressure handling in pneumatic lines, hydraulic systems, and general fluid conveyance. The inherent flexibility and impact strength of nylon make it suitable for applications where vibration and shock are prevalent, providing a long service life and minimizing maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion until it bottoms out. 4. Hold firmly for 30 seconds to prevent movement while the cement sets.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper solvent cement for nylon fittings. | Always use a solvent cement specifically formulated for nylon to ensure a strong, leak-proof bond. |
| Over-tightening threaded connections. | Hand-tighten threaded fittings, then use a wrench for an additional 1/4 to 1/2 turn. Over-tightening can crack the nylon. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Pneumatic conveying systems, Hydraulic fluid lines, Chemical and industrial fluid transfer, Automotive and transportation fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||