This 2.5-inch Schedule 80 seamless brass pipe offers superior strength and corrosion resistance. Engineered for demanding fluid and gas transport in industrial settings, ensuring reliable performance under pressure.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 3.779" |
| Wall Thickness | 0.303" |
Built to exacting engineering tolerances, this 2.5-inch Schedule 80 seamless brass pipe boasts an outside diameter of 3.779 inches and a substantial wall thickness of 0.303 inches. The inherent properties of brass, including excellent corrosion resistance and machinability, make it ideal for applications involving corrosive media, high temperatures, and moderate pressures. Its seamless construction eliminates weak points, ensuring integrity in critical fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of contaminants. 2. Properly align pipe with mating fittings, ensuring full thread engagement or secure joint preparation. 3. Apply appropriate sealant or flux and complete the joining process according to fitting manufacturer specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect joining methods for brass, potentially leading to leaks or joint failure. | Always adhere to the recommended joining procedures for brass, whether it involves threading, brazing, or soldering, using compatible materials and techniques. |
| Exposing brass pipe to aggressive chemicals that can cause dezincification or corrosion. | Verify the chemical compatibility of brass with the specific fluid being transported before installation. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid transfer systems, Industrial instrumentation lines, Corrosive chemical handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||