This 2.5" Schedule 40 brass seamless pipe offers exceptional corrosion resistance and durability. Engineered for demanding industrial fluid transfer applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 5.535" |
| Wall Thickness | 0.426" |
A high-performance industrial component, this 2.5" Schedule 40 seamless brass pipe boasts a precise 5.535" outside diameter and a substantial 0.426" wall thickness. Crafted from high-grade brass, it exhibits excellent machinability and superior resistance to a wide range of corrosive media, including water, mild chemicals, and certain industrial oils. Its seamless construction ensures uniform wall thickness, eliminating potential leak points and enhancing pressure containment capabilities, making it ideal for critical fluid conveyance systems in chemical processing, marine environments, and HVAC.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the pipe ends and the fitting socket thoroughly. 2. Apply a thin, even layer of appropriate brass-compatible pipe joint compound or PTFE tape to the male threads. 3. Insert the pipe into the fitting socket, ensuring proper alignment, and rotate to engage threads. 4. Tighten the fitting to the manufacturer's recommended torque specifications, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thread sealant for brass fittings. | Always use sealants specifically formulated for brass to prevent galvanic corrosion and ensure a secure seal. |
| Overtightening threaded connections. | Refer to fitting manufacturer's torque charts or tighten until snug plus an additional 1/4 to 1/2 turn to avoid damaging threads or the fitting. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Chemical processing and transfer lines, Marine and offshore fluid systems, HVAC and plumbing systems requiring corrosion resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||