This robust deep groove ball bearing, crafted from durable carbon steel, is engineered for efficient power transmission. Its precise dimensions ensure smooth operation and longevity in high-demand industrial settings.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 24mm |
| Outside Diameter | 36mm |
| Width | 12mm |
Designed for demanding industrial environments, this deep groove ball bearing features a precise 24mm inside diameter, a 36mm outside diameter, and a 12mm width. Constructed from high-grade carbon steel, it offers exceptional hardness, wear resistance, and load-bearing capacity. The raceway geometry is optimized for high rotational speeds and axial loads in both directions, making it suitable for applications requiring reliable power transfer and minimal friction. Its robust construction ensures longevity and consistent performance under significant stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the shaft and housing bore thoroughly before installation. 2. Gently press the bearing onto the shaft or into the housing, ensuring proper alignment. 3. Secure the bearing using the designated retaining mechanism (e.g., snap rings, housings).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to brinelling or damage. | Use a proper bearing press or a controlled hammer technique with a suitable driver to apply force evenly on the bearing's ring that is being fitted. |
| Installing the bearing without proper lubrication. | Ensure the bearing is adequately pre-lubricated according to the manufacturer's specifications before installation and at scheduled maintenance intervals. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||