This robust deep groove ball bearing, constructed from aerospace-grade Aluminum 6061, offers exceptional corrosion resistance and lightweight performance for critical power transmission systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 24mm |
| Outside Diameter | 111mm |
| Width | 46mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an internal bore of 24mm, an external diameter of 111mm, and a width of 46mm. The Aluminum 6061 alloy provides a superior strength-to-weight ratio, excellent machinability, and inherent corrosion resistance, making it ideal for environments where traditional steel bearings may degrade. Its design accommodates radial and axial loads, ensuring smooth and efficient operation in rotational applications. Ideal for moderate speed and load conditions, this bearing is engineered for reliability and longevity in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. Verify dimensional compatibility. 2. Carefully press the bearing onto the shaft using a hydraulic press or appropriate bearing installer, applying even pressure to the inner ring. 3. Position the bearing in the housing bore, ensuring it seats fully and squarely. Avoid applying force to the outer ring when pressing into the housing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying installation force to the outer ring when pressing onto a shaft. | Always apply force to the inner ring when installing onto the shaft and to the outer ring when pressing into the housing to prevent damage to the raceways. |
| Ignoring shaft or housing tolerances, leading to improper fit. | Precisely adhere to the specified shaft and housing tolerance recommendations for the bearing's dimensions to ensure optimal performance and prevent premature failure. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric motor shafts, Conveyor systems, Industrial gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||