Engineered for reliability in power transmission systems, this Aluminum 6061 deep groove ball bearing offers exceptional corrosion resistance and lightweight performance. Its precise dimensions ensure smooth operation and extended service life in demanding industrial applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 24mm |
| Outside Diameter | 99mm |
| Width | 40mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 24mm, an outside diameter of 99mm, and a width of 40mm. Constructed from Aluminum 6061, it provides superior corrosion resistance and a significantly lighter weight compared to steel alternatives, making it ideal for applications where weight reduction and environmental resilience are critical. Its design allows for high radial and axial loads, ensuring efficient power transfer and extended operational longevity in diverse industrial machinery, automotive components, and aerospace systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring. 3. Once the inner ring is seated, position the bearing within the housing and press the outer ring into place, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft installation. | Always apply mounting force exclusively to the ring that is being fitted. For shaft mounting, force should be applied to the inner ring only. |
| Improper cleaning of mounting surfaces. | Thoroughly clean the shaft and housing bore to remove any grease, dirt, or burrs that could impede proper seating and lead to premature bearing failure. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||