This Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for demanding fabrication and structural applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.212" |
| Length | 24" |
| Width | 27" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet measures 0.212 inches in thickness, with a nominal length of 24 inches and a width of 27 inches. Composed of aluminum alloy 6061, it boasts excellent mechanical properties, including good weldability, formability, and high strength, particularly after heat treatment. This makes it a preferred material for structural components, automotive parts, and marine hardware where durability and resistance to environmental degradation are paramount. The precise dimensions ensure consistent fit and finish in intricate assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both surfaces of the Aluminum 6061 sheet thoroughly to remove any oils, dirt, or debris. 2. Prepare the joining surfaces according to the intended fabrication method (e.g., welding, riveting, or adhesive bonding). 3. Carefully align and secure the Aluminum 6061 sheet in its final position before commencing assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible welding filler materials for 6061 aluminum. | Utilize 4043 or 5356 filler wire for optimal weld strength and ductility when joining 6061 aluminum. |
| Insufficient pre-cleaning of the aluminum surface before bonding or welding. | Always degrease and mechanically abrade the aluminum surface to ensure proper adhesion and prevent weld porosity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace components, Automotive frames and parts, Marine structures and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||