This 2.4-inch Schedule 40 seamless nylon pipe offers superior strength and chemical resistance. Engineered for reliability in demanding industrial environments, it ensures consistent performance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.4" |
| Outside Diameter | 2.425" |
| Wall Thickness | 0.391" |
Specified by design engineers worldwide, this seamless nylon pipe adheres to rigorous Schedule 40 dimensional standards for precise integration. With an external diameter of 2.425 inches and a substantial wall thickness of 0.391 inches, it provides exceptional burst strength and resistance to internal pressures. The inherent properties of nylon, including its excellent abrasion resistance, low coefficient of friction, and broad chemical compatibility, make it ideal for fluid transfer, pneumatic systems, and specialized industrial conduits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion until it bottoms out. 4. Hold firmly for 30 seconds to prevent slippage, then allow adequate cure time before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for nylon pipe. | Always use a solvent cement specifically formulated for nylon to ensure proper fusion and a leak-free joint. |
| Insufficient cure time before system operation. | Allow the recommended cure time for the solvent cement to fully harden before introducing pressure or fluid to the system. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: High-pressure fluid transfer lines, Pneumatic control systems, Chemical processing equipment, Industrial hydraulic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||