This 2.2" Schedule 40 polycarbonate seamless pipe offers exceptional clarity, high impact strength, and excellent chemical resistance, making it ideal for demanding industrial and scientific applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.2" |
| Outside Diameter | 1.334" |
| Wall Thickness | 0.430" |
Trusted by engineers across multiple sectors, this 2.2" Schedule 40 seamless pipe boasts a precise 1.334" outside diameter and a robust 0.430" wall thickness, conforming to Schedule 40 dimensions. Constructed from high-grade polycarbonate, it exhibits superior transparency, an impressive tensile strength of 9,000 psi, and a remarkable impact resistance of 16 ft-lbs/in (Izod) at room temperature. Its broad operating temperature range of -40°F to 250°F (-40°C to 121°C) and resistance to many acids, alkalis, and salts ensure reliability in diverse environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement for polycarbonate to both the pipe end and fitting socket. 3. Quickly insert the pipe into the fitting with a quarter-twist motion, holding for 30 seconds to prevent slippage. 4. Allow adequate cure time as per solvent cement manufacturer's recommendations before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of solvent cement. | Always use a solvent cement specifically formulated for polycarbonate to ensure proper bonding and prevent material degradation. |
| Insufficient cure time before system pressurization. | Adhere strictly to the solvent cement manufacturer's recommended cure times for both initial set and full strength to avoid joint failure. |
| Exposing the pipe to incompatible chemicals. | Consult a chemical resistance chart for polycarbonate to verify compatibility with fluids and environmental conditions before installation. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Sight glasses and fluid level indicators, Laboratory and medical equipment tubing, Protective shielding and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||