This 2.2" Schedule 40 seamless brass pipe offers superior corrosion resistance and machinability, making it ideal for demanding fluid conveyance and structural applications where durability is paramount.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.2" |
| Outside Diameter | 4.008" |
| Wall Thickness | 0.139" |
Trusted by engineers across multiple sectors, this 2.2" Schedule 40 seamless brass pipe features a nominal pipe size of 2.2 inches, an outside diameter of 4.008 inches, and a wall thickness of 0.139 inches. Fabricated from high-quality brass alloys, it exhibits excellent tensile strength and ductility, ensuring reliable performance in moderate pressure environments. Its inherent corrosion resistance makes it suitable for a wide range of fluid handling systems, including water distribution, chemical processing, and HVAC.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of damage. 2. Apply appropriate flux and solder to fittings and pipe ends before joining. 3. Heat joint evenly and apply solder, allowing capillary action to draw it into the gap.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of flux for brass. | Always use a flux specifically formulated for brass soldering or brazing. |
| Overheating the brass during soldering. | Control heat to avoid excessive oxidation and potential weakening of the material. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Water distribution systems, Chemical fluid conveyance, HVAC and refrigeration lines, Decorative architectural elements, Instrumentation tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||