This 2.1" Schedule 40 seamless pipe, constructed from high-grade 304 stainless steel, offers superior corrosion resistance and mechanical strength for demanding industrial applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.1" |
| Outside Diameter | 1.953" |
| Wall Thickness | 0.311" |
Manufactured under strict quality controls, this 2.1" nominal pipe size (NPS) seamless pipe features a precise 1.953" outside diameter and a robust 0.311" wall thickness, conforming to Schedule 40 dimensions. Fabricated from premium 304 stainless steel, it exhibits excellent resistance to a wide range of corrosive media, including acids and chlorides, and maintains structural integrity at elevated temperatures. Its seamless construction eliminates weld line vulnerabilities, ensuring maximum reliability in high-pressure fluid and gas transfer systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of any contaminants. 2. Apply appropriate lubricant to pipe ends and fitting sockets. 3. Insert pipe ends fully into the fitting sockets and rotate slightly to distribute lubricant.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining methods for the specific application's pressure and temperature requirements. | Always consult the material data sheet and application requirements to select the correct welding, threading, or brazing procedure and consumables. |
| Failure to properly support the pipe run, leading to sagging or undue stress on joints. | Install pipe supports at appropriate intervals according to industry best practices and the weight of the pipe and its contents. |
A: This Seamless Pipe, Schedule 40 is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Food and beverage processing lines, Pharmaceutical manufacturing systems, High-purity water systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||