Engineered for demanding industrial environments, this 2" Schedule 80 seamless nylon pipe offers superior chemical resistance and durability. Its robust construction ensures reliable performance in high-pressure fluid and gas conveyance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 2.0" |
| Outside Diameter | 6.379" |
| Wall Thickness | 0.243" |
Purpose-built for heavy-duty applications, this 2.0" Schedule 80 seamless nylon pipe features a precise outside diameter of 6.379" and a substantial wall thickness of 0.243". Manufactured from high-grade nylon, it exhibits excellent resistance to a wide range of chemicals, abrasion, and impact. Its seamless construction eliminates potential leak points, making it ideal for critical fluid transfer lines, hydraulic systems, pneumatic conveyance, and general industrial piping where reliability and longevity are paramount. The Schedule 80 designation signifies its capability to withstand significant internal pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and fitting socket. 3. Insert pipe into fitting with a quarter-twist to distribute cement evenly. 4. Hold in place for 30 seconds to prevent slippage during initial cure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for nylon. | Always use a solvent cement specifically formulated for nylon to ensure a proper, strong bond. |
| Insufficient curing time before pressurization. | Allow adequate time for the solvent cement to fully cure according to manufacturer's specifications before introducing pressure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Chemical Processing Lines, High-Pressure Pneumatic Systems, Hydraulic Fluid Transfer, Industrial Water and Air Lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||