This 2" Schedule 40 polycarbonate seamless pipe offers exceptional clarity, impact resistance, and chemical inertness. Ideal for demanding fluid transfer and visual monitoring in harsh industrial environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.0" |
| Outside Diameter | 2.276" |
| Wall Thickness | 0.270" |
Engineered for reliability and performance, this 2.0" Schedule 40 seamless polycarbonate pipe boasts a precise 2.276" outside diameter and a robust 0.270" wall thickness. Its inherent transparency allows for visual monitoring of flow, while its superior impact strength and broad chemical resistance make it suitable for a wide range of corrosive and high-pressure applications. Operating temperature range and pressure ratings should be confirmed against specific environmental conditions and fluid compatibility charts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Use appropriate solvent cement specifically formulated for polycarbonate, following manufacturer's instructions for application and cure time. 3. Support the pipe adequately along its length to prevent sagging and stress at joints.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a solvent cement not designed for polycarbonate, leading to cracking or embrittlement. | Always select a high-quality solvent cement explicitly rated for polycarbonate pipe to ensure a strong, durable bond. |
| Over-tightening fittings, causing stress concentration and potential failure of the pipe wall. | Hand-tighten fittings and apply only minimal additional torque, if necessary, ensuring the seal is achieved without deformation. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Chemical processing and transfer lines, Visual flow monitoring systems, Laboratory and research equipment, Pneumatic conveying systems, High-impact protective shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||