This 2-inch Schedule 40 seamless carbon steel pipe offers robust performance for demanding industrial applications. Its seamless construction ensures superior integrity and reliability for critical fluid conveyance systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.0" |
| Outside Diameter | 4.837" |
| Wall Thickness | 0.396" |
Built to exacting engineering tolerances, this 2" Schedule 40 seamless carbon steel pipe features a precise 4.837" outside diameter and a substantial 0.396" wall thickness. Manufactured from high-grade carbon steel, it exhibits excellent tensile strength and weldability, making it ideal for conveying fluids and gases under moderate to high pressure and temperature conditions. Its seamless design eliminates potential leak paths inherent in welded pipes, ensuring long-term operational safety and efficiency across various industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of burrs, and properly beveled for welding or threading. 2. Fit pipe securely into the mating connection (e.g., flange, coupling, or threaded fitting) ensuring alignment. 3. Perform welding or threading according to industry best practices and applicable codes, verifying joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe schedule for pressure requirements. | Always verify the pressure and temperature ratings of Schedule 40 pipe against the specific application's demands. |
| Inadequate pipe end preparation for joining. | Thoroughly clean, deburr, and bevel pipe ends to ensure a strong and leak-free connection, whether by welding or threading. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transport, Boiler and heat exchanger tubing, General structural and mechanical purposes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||