This 2" polycarbonate U-bolt provides robust, corrosion-resistant support for piping systems. Its high-strength, non-conductive polymer construction ensures longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.98" |
| Inside Length ( B) | 3.05" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 2" U-bolt is manufactured from high-performance polycarbonate, renowned for its exceptional chemical resistance, UV stability, and dielectric strength. The precise dimensions, including an inside width (A) of 3.98 inches and an inside length (B) of 3.05 inches, ensure a secure and snug fit for 2-inch nominal pipe sizes. The robust 1/2"-13 UNC thread provides ample strength for secure fastening with standard nuts and washers, making it ideal for applications where metal corrosion or electrical conductivity is a concern, such as chemical processing, water treatment, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface. 2. Thread the nuts onto the U-bolt legs until snug, ensuring even pressure on both sides. 3. Tighten nuts to the manufacturer's recommended torque, ensuring the pipe is securely held without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, potentially cracking the polycarbonate. | Use a torque wrench set to the recommended value for polycarbonate fasteners to prevent over-stressing the material. |
| Using metal washers that can cause galvanic corrosion or scratch the polycarbonate. | Employ non-metallic washers, such as nylon or polyethylene, to maintain the material's integrity and prevent potential damage. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Water and wastewater treatment facilities, Marine and offshore installations, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||