Engineered for demanding environments, this 2" polycarbonate U-bolt offers exceptional chemical resistance and electrical insulation. Its robust construction ensures secure pipe support in corrosive or hazardous applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 1.04" |
| Inside Length ( B) | 4.58" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this U-bolt features a nominal pipe size of 2 inches with an Inside Width (A) of 1.04 inches and an Inside Length (B) of 4.58 inches. Constructed from high-performance polycarbonate, it exhibits excellent resistance to a wide range of chemicals, acids, and alkalis, making it ideal for harsh environments where metal corrosion is a concern. The 1/2"-13 UNC thread size ensures compatibility with standard nuts and washers. Its non-conductive properties also make it suitable for electrical isolation applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe rests within the curved section. 2. Place the U-bolt through the mounting surface or bracket. 3. Secure the U-bolt by threading the nuts onto the bolt ends, tightening evenly on both sides to achieve firm support without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the U-bolt, potentially cracking the polycarbonate. | Tighten nuts gradually and evenly until the pipe is securely held. Avoid excessive force. |
| Using the wrong size U-bolt for the pipe diameter. | Verify the Inside Width (A) and Inside Length (B) match the specific pipe dimensions and required clearance. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine environments, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||