This 2" polycarbonate U-bolt offers superior corrosion resistance and non-conductive properties. Engineered for secure pipe support, its robust design ensures long-term reliability in demanding environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 4.26" |
| Inside Length ( B) | 2.88" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 2" polycarbonate U-bolt features an inside width (A) of 4.26 inches and an inside length (B) of 2.88 inches, accommodating standard 2-inch nominal pipe sizes. The 1/2"-13 thread size ensures robust attachment capabilities. Constructed from high-impact, UV-stabilized polycarbonate, it exhibits excellent chemical resistance, preventing degradation from common industrial solvents and acids. This material also provides electrical insulation, making it ideal for applications where grounding is a concern or hazardous environments necessitate non-conductive hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it rests evenly on the supporting structure. 2. Thread the nuts onto the U-bolt legs until snug, applying even pressure. 3. Tighten the nuts securely using appropriate wrenches, but avoid overtightening to prevent deformation of the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nuts, causing stress cracks in the polycarbonate. | Tighten nuts until firm, then apply an additional quarter-turn. Use a torque wrench if precise application is critical. |
| Selecting the wrong U-bolt size for the pipe diameter. | Always verify the nominal pipe size and measure the actual outside diameter to ensure compatibility with the U-bolt's inside dimensions. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Water and wastewater treatment infrastructure, Electrical conduit securing, Marine and offshore applications, Food and beverage processing lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||