Engineered for demanding environments, this 2" polycarbonate U-bolt provides exceptional corrosion resistance and electrical insulation for secure pipe support.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 3.91" |
| Inside Length ( B) | 5.66" |
| Thread Size | 1/2"-13 |
Trusted by engineers across multiple sectors, this 2" U-bolt is manufactured from high-strength polycarbonate, offering superior chemical and UV resistance compared to traditional metal fasteners. Its non-conductive properties make it ideal for applications where electrical isolation is critical. Precisely manufactured to specifications, it features an inside width (A) of 3.91 inches and an inside length (B) of 5.66 inches, accommodating standard 2-inch nominal pipe. The robust 1/2"-13 thread ensures secure fastening and long-term stability in corrosive or hazardous atmospheres.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring even contact with the pipe surface. 2. Thread the nuts onto the U-bolt legs, hand-tightening initially. 3. Use appropriate wrenches to tighten the nuts evenly on both sides until the pipe is securely held, taking care not to overtighten and deform the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, causing deformation of the polycarbonate. | Tighten nuts incrementally and evenly on both sides, using a torque wrench if specifications require, to achieve a secure fit without stressing the material. |
| Using metal washers directly against the polycarbonate, potentially causing abrasion or stress concentration. | Utilize plastic or composite washers if available, or ensure smooth contact surfaces to prevent damage to the U-bolt during installation. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||