Engineered for superior corrosion resistance, this 2" polycarbonate U-bolt offers a robust, non-conductive solution for securing piping in demanding environments. Ideal for chemical processing and marine use.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 4.42" |
| Inside Length ( B) | 2.97" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 2" nominal pipe size U-bolt features an inside width (A) of 4.42 inches and an inside length (B) of 2.97 inches. Constructed from high-strength, impact-resistant polycarbonate, it offers exceptional chemical inertness and a dielectric strength of 400 V/mil. The 1/2"-13 UNC thread size ensures secure fastening with standard hardware. Its lightweight, non-metallic composition makes it ideal for applications where galvanic corrosion is a concern or where electrical insulation is required.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it rests securely on the supporting structure. 2. Insert the threaded legs through the mounting holes of the support. 3. Securely fasten using the appropriate nuts and washers, tightening evenly to achieve a snug fit without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress or crack the polycarbonate. | Tighten nuts gradually and evenly until the pipe is firmly secured, but avoid excessive force. |
| Using the U-bolt for loads exceeding its rated capacity. | Consult the product's load rating specifications and ensure it is suitable for the intended application. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Marine and offshore piping, Corrosive environment conduit securing, Electrical insulation for pipe runs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||