Engineered from high-strength nylon, this 2" U-bolt offers superior corrosion resistance and vibration dampening for secure pipe mounting. Its robust design ensures reliable performance in challenging industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 3.95" |
| Inside Length ( B) | 2.57" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 2" Nylon U-Bolt features an inside width (A) of 3.95 inches and an inside length (B) of 2.57 inches, accommodating standard 2-inch nominal pipe. The 1/2"-13 UNC thread size allows for secure fastening with common hardware. Constructed from premium, industrial-grade nylon, it exhibits excellent chemical resistance, dielectric properties, and a high tensile strength-to-weight ratio, making it ideal for applications where galvanic corrosion is a concern or electrical insulation is required. Its inherent flexibility helps absorb vibration, reducing stress on the supported pipe and system.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and through the mounting surface or bracket. 2. Secure with appropriate nuts and washers (not included), tightening evenly. 3. Ensure snug fit without over-tightening to avoid material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can lead to cracking or deformation of the nylon U-bolt. | Tighten nuts until snug and the U-bolt conforms to the pipe, but avoid excessive force. Use a torque wrench if precise values are critical. |
| Using the U-bolt in an environment exceeding its temperature or chemical resistance limits. | Verify the operating temperature range and chemical compatibility of nylon for the specific application before installation. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Plumbing and piping systems, Electrical conduit support, Marine applications, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||