This 2" Nylon U-Bolt is engineered for secure and reliable pipe support. Its high-strength nylon construction provides excellent corrosion resistance, electrical insulation, and vibration dampening, making it ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 4.71" |
| Inside Length ( B) | 5.57" |
| Thread Size | 1/2"-13 |
A proven choice for industrial professionals, this 2" Nylon U-Bolt is meticulously manufactured to meet stringent performance requirements. Featuring an Inside Width (A) of 4.71 inches and an Inside Length (B) of 5.57 inches, it accommodates standard 2-inch nominal pipe sizes. The robust 1/2"-13 thread size ensures secure fastening. Constructed from high-performance nylon, this U-bolt exhibits superior resistance to chemicals, moisture, and UV degradation, while offering excellent dielectric properties and a lower coefficient of friction compared to metal alternatives. Its lightweight design simplifies handling and installation, reducing labor costs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it straddles the pipe evenly. 2. Place the U-bolt over the mounting surface, aligning the threaded ends with the pre-drilled holes or mounting plate. 3. Secure the U-bolt by threading the nuts onto the threaded ends, tightening them evenly on both sides until snug. Avoid overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can deform the nylon and compromise its structural integrity or load-bearing capacity. | Tighten nuts until snug and the U-bolt conforms to the pipe and mounting surface, then apply an additional 1/4 to 1/2 turn. Use a torque wrench if specific torque values are required for the application. |
| Selecting a U-bolt with insufficient internal dimensions for the pipe's outer diameter, leading to binding or improper fit. | Always verify the pipe's actual outer diameter and compare it with the U-bolt's Inside Width (A) and Inside Length (B) specifications to ensure a proper fit. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Piping systems in chemical processing plants, Electrical conduit and cable tray support, Marine and offshore applications where corrosion is a concern.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||