This high-performance nylon U-bolt is engineered for secure and reliable pipe support. Its robust construction and chemical resistance ensure long-term durability in challenging environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.20" |
| Inside Length ( B) | 6.42" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this 2" Nylon U-Bolt is constructed from a durable, high-strength nylon material offering exceptional resistance to corrosion, chemicals, and UV degradation. Featuring an inside width (A) of 3.20 inches and an inside length (B) of 6.42 inches, it is designed to accommodate standard 2-inch nominal pipe sizes. The integrated 1/2"-13UNC threads provide a secure and robust fastening mechanism, suitable for a wide range of load-bearing and structural applications where non-conductivity and environmental resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it is centered on the desired support point. 2. Insert the threaded legs through the mounting holes of the associated bracket or fixture. 3. Secure the U-bolt by threading the nuts onto the legs until snug, applying even pressure on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon and compromise its structural integrity. | Tighten nuts until snug, then apply an additional quarter to half turn. Avoid excessive force. |
| Using the U-bolt in applications exceeding its rated load capacity. | Consult the product's technical data sheet for load ratings and ensure the application does not exceed these limits. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Plumbing and pipe support in corrosive environments, Electrical conduit and cable tray mounting, Marine and chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||