This heavy-duty nylon U-bolt is engineered for robust pipe support in corrosive and demanding environments. Its non-conductive, high-strength nylon construction offers exceptional resistance to chemicals and impact.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 1.63" |
| Inside Length ( B) | 7.02" |
| Thread Size | 1/2"-13 |
Purpose-built for heavy-duty applications, this 2" nylon U-bolt features an inside width of 1.63" and an inside length of 7.02", accommodating standard 2" nominal pipe sizes. Manufactured from high-performance nylon, it offers excellent dielectric properties, superior corrosion resistance against a wide range of chemicals and saltwater, and exceptional impact strength, even at low temperatures. The 1/2"-13 thread size ensures secure fastening. Ideal for marine, chemical processing, and infrastructure applications where traditional metal fasteners would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe and desired mounting surface. 2. Thread the nuts onto the U-bolt legs, ensuring even engagement. 3. Tighten nuts to secure the assembly, avoiding over-torquing to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, crushing the nylon. | Use a torque wrench set to the manufacturer's recommended specification for nylon fasteners. If a torque wrench is unavailable, tighten until snug and then an additional quarter turn. |
| Using for continuous high-temperature applications exceeding nylon's thermal limits. | Consult the nylon material's datasheet for continuous and intermittent operating temperature ranges. Select an alternative material if operating temperatures exceed the nylon's capabilities. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Marine and offshore pipe support, Chemical processing plant conduit and pipe anchoring, Wastewater treatment facility installations, Electrical conduit mounting in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||