This robust 2.0" Schedule 40 seamless nylon pipe offers exceptional durability and chemical resistance for demanding industrial fluid and pneumatic applications. Engineered for reliability and long service life.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.0" |
| Outside Diameter | 3.340" |
| Wall Thickness | 0.249" |
A high-performance industrial component, this 2.0" Schedule 40 seamless pipe is manufactured from premium-grade Nylon, ensuring superior tensile strength and abrasion resistance. With an outside diameter of 3.340" and a substantial wall thickness of 0.249", it meets rigorous Schedule 40 dimensional standards for compatibility with standard fittings. Its inherent chemical inertness makes it ideal for conveying a wide range of fluids, including aggressive chemicals, oils, and solvents, while its smooth internal surface minimizes flow restriction and buildup. Operating temperature range is -40°F to 180°F (-40°C to 82°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of debris, and properly deburred. 2. Apply appropriate solvent cement and primer (if applicable for specific nylon types) to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twist to ensure even cement distribution, holding firmly for the recommended set time. 4. Allow adequate curing time before pressurizing the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for Nylon. | Always use solvent cement specifically formulated for Nylon to ensure a proper, chemically bonded joint. |
| Inadequate pipe end preparation. | Thoroughly clean and deburr pipe ends to guarantee a tight, leak-free seal within the fitting socket. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Industrial fluid transfer systems, Pneumatic control lines, Chemical conveyance systems, Hydraulic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||