This 2-inch brass U-bolt is engineered for superior corrosion resistance and durability in demanding environments. Featuring precise dimensions and robust construction, it ensures secure and reliable pipe support.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 1.03" |
| Inside Length ( B) | 3.41" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 2-inch brass U-bolt is manufactured from high-grade brass alloy (typically UNS C26000 or similar) renowned for its exceptional corrosion resistance, particularly against water and mild chemicals. The inside width (A) is precisely 1.03 inches, while the inside length (B) measures 3.41 inches, accommodating standard 2-inch nominal pipe sizes. It is equipped with a robust 1/2"-13 UNC thread pitch, ensuring secure fastening with compatible nuts and washers. The material's inherent non-sparking properties also make it suitable for hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2-inch pipe, ensuring it rests securely in its intended location. 2. Place the backing plate (if applicable) against the mounting surface and insert the threaded ends of the U-bolt through the designated holes. 3. Thread the appropriate nuts onto the U-bolt ends and tighten them evenly to secure the pipe and U-bolt. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size and ensure it matches the U-bolt's intended fit. Measure pipe OD if unsure. |
| Over-tightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts until snug and the pipe is securely held, but do not apply excessive force. |
| Not using appropriate washers, leading to uneven pressure distribution. | Always use flat washers under the nuts to distribute load and prevent damage to the mounting surface. |
A: This Brass U-Bolt, 2" Pipe is manufactured from Brass.
A: Plumbing and piping systems in corrosive environments, Marine applications (e.g., boat rigging, exhaust systems), Electrical conduit support where corrosion resistance is paramount.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||