This Schedule 80 seamless brass pipe offers superior strength and corrosion resistance. Its precise dimensions ensure reliable performance in high-pressure and demanding environments across various industries.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.9" |
| Outside Diameter | 2.183" |
| Wall Thickness | 0.154" |
Trusted by engineers across multiple sectors, this 1.9" (nominal) Schedule 80 seamless brass pipe features an exact outside diameter of 2.183" and a substantial wall thickness of 0.154". Manufactured from high-grade brass alloys, it exhibits excellent machinability, inherent corrosion resistance to a wide range of fluids and gasses, and a high tensile strength suitable for pressure systems. Its seamless construction eliminates potential leak paths inherent in welded pipes, making it ideal for critical applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of debris. 2. Apply appropriate flux and solder to the joint for brazing or soldering. 3. Assemble the pipe and fitting, ensuring a snug fit, and heat uniformly for proper joint formation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining methods for brass pipe. | Always use joining methods (brazing, soldering, or threaded fittings) specifically rated for brass and the operating pressure and temperature of the system. |
| Overheating brass during soldering or brazing, leading to material degradation. | Control heat application carefully, ensuring even distribution and avoiding prolonged overheating to maintain the integrity of the brass alloy. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Hydraulic systems, Pneumatic lines, Instrumentation tubing, Corrosive fluid transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||