Purpose-built for heavy-duty applications, this 1.9" Schedule 40 seamless brass pipe delivers exceptional durability and corrosion resistance. Its robust construction ensures reliable performance in demanding fluid transfer and structural applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.9" |
| Outside Diameter | 2.465" |
| Wall Thickness | 0.430" |
Purpose-built for heavy-duty applications, this seamless brass pipe adheres to Schedule 40 dimensions, featuring a nominal pipe size of 1.9 inches, an exact outside diameter of 2.465 inches, and a substantial wall thickness of 0.430 inches. The inherent properties of brass, including excellent machinability, good tensile strength, and superior resistance to corrosion from water, chemicals, and atmospheric conditions, make it ideal for fluid conveyance systems, heat exchangers, and structural components in marine, chemical processing, and general industrial environments. Its seamless construction eliminates weld-related weaknesses, ensuring consistent pressure ratings and integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to mating surfaces. 3. Insert pipe into fitting with a slight twist and hold for 30 seconds. 4. Allow adequate cure time as per manufacturer's instructions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect primer/cement for brass fittings. | Always use solvent cement and primer specifically formulated for brass or compatible alloys. |
| Insufficient cure time before pressure testing. | Adhere strictly to the cure time recommendations for the specific solvent cement used to ensure a strong, leak-proof joint. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid conveyance in chemical processing, Heat exchangers and marine applications, Structural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||