This robust deep groove ball bearing, constructed from durable carbon steel, offers exceptional load-bearing capacity and smooth rotational performance for critical power transmission systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 18mm |
| Outside Diameter | 187mm |
| Width | 32mm |
Manufactured under strict quality controls, this deep groove ball bearing features an 18mm inner diameter, a 187mm outer diameter, and a 32mm width. The high-carbon steel construction ensures superior hardness, wear resistance, and tensile strength, making it ideal for applications subjected to moderate to heavy radial and axial loads. Its precise internal geometry minimizes friction, contributing to energy efficiency and extended service life in demanding operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris or contaminants. 2. Carefully press or gently tap the bearing onto the shaft, ensuring it seats squarely without tilting. 3. Install the bearing into the housing, again ensuring a flush and square fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a proper bearing press or a soft-faced hammer for controlled and even force application. Heat the bearing slightly if necessary for easier installation. |
| Contamination of bearing surfaces with dirt or grease during handling. | Keep the bearing in its original packaging until installation. Handle with clean, lint-free gloves and apply lubricant in a clean environment. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric motors and generators, Gearboxes and transmissions, Industrial pumps and compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||