This robust deep groove ball bearing, constructed from durable carbon steel, offers exceptional performance and longevity. Its precise dimensions ensure seamless integration into various power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 18mm |
| Outside Diameter | 166mm |
| Width | 21mm |
Specified by design engineers worldwide, this deep groove ball bearing features an 18mm inside diameter, a 166mm outside diameter, and a 21mm width. Fabricated from premium carbon steel, it exhibits excellent hardness and wear resistance, ideal for supporting radial and axial loads. Its precision-ground raceways minimize friction and heat generation, ensuring efficient operation and extended service life in high-speed and moderate-load applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly. 2. Apply a thin layer of appropriate lubricant to the bearing and housing. 3. Carefully press the bearing into the housing or onto the shaft, ensuring it is seated squarely and without tilting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage. | Utilize a bearing press or appropriate tooling for controlled and even force application. Avoid hammering the bearing. |
| Insufficient or improper lubrication. | Ensure the correct type and amount of lubricant are applied according to manufacturer recommendations and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric motors, Gearboxes, Pumps, Conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||