This 1.8" Schedule 40 seamless brass pipe offers superior corrosion resistance and durability. Its precise dimensions ensure reliable performance in demanding industrial and commercial fluid handling systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.8" |
| Outside Diameter | 3.241" |
| Wall Thickness | 0.402" |
Precision-manufactured to tight tolerances, this 1.8" Schedule 40 seamless brass pipe features an outside diameter of 3.241" and a substantial wall thickness of 0.402". Constructed from high-grade brass, it exhibits excellent machinability, tensile strength, and inherent resistance to a wide range of corrosive media, including water, oils, and mild acids. The seamless construction eliminates weld-related weaknesses, ensuring integrity under high pressure and temperature fluctuations. Its robust build makes it suitable for critical fluid conveyance, heat exchangers, and structural components where long-term reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate flux and solder for brass fittings. 3. Heat joint evenly and allow solder to flow completely, ensuring a secure bond.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect flux or solder for brass. | Always use a flux specifically formulated for brass and a solder with a compatible melting point to ensure a strong, leak-free joint. |
| Insufficient heating of the joint. | Adequately heat both the pipe and fitting to the proper temperature for the solder to capillary action effectively and create a complete bond. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid and gas distribution systems, Heat exchanger tubing, Decorative and structural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||